مشخصات پچ پنل 24 پورت سرلینک مدل T5E
ابعاد
480x44x30
استاندارد سیم‌کشی
T568A , T568B
استانداردها
According to the standard of ISO/IEC 11801 2000 CLASS D and ANSI/TIA/EIA/568BCat.5e standard. T568A punching sequence and T568B punching sequence are both
compatible. Fitting for horizontal distribution in the equipments room and
equipments connecting.
compatible. Fitting for horizontal distribution in the equipments room and
equipments connecting.
اقلام همراه
back bar
برند
sur link سرلینک
تعداد پورت
24 پورت
جنس پنل
اهنی
جنس فیس پلیت
آهنی
سازگار با کابل
24AWG , 22AWG
سازگاری با ابزار پانچ
Krone
قابلیت‌های پچ پنل
مدیریت کابل
گارانتی
گارانتی سلامت فیزیکی کالا,۷ روز تضمین بازگشت کالا
مشخصات تکمیلی
Main Description of The Product 1. 24 ports patch panel, Cat.5e UTP type. The structure of each port of this patch
panel is same which makes sure that the performance of each port is consistent.
2. According to the standard of ISO/IEC 11801 2000 CLASS D and ANSI/TIA/EIA/568B
Cat.5e standard. T568A punching sequence and T568B punching sequence are both
compatible. Fitting for horizontal distribution in the equipments room and
equipments connecting.
3. Connecting FCC port for Cat.5e UTP patch cord and IDC for horizontal distribution
cables.
4. Compatibility Compatible for UTP Cat.5e general cable distribution systems.
5. IDC 110 type or dual use type for your choice.
Technique Characteristics
1. Entire high-carbon steel outer frame, with plastic powder cladding.
2. RJ45 jack frame material PBT, golden plated phosphor bronze pins, Shielding shell
of the RJ45 jack Brass housing with nicket-plated; IDC clip Tinned phosphor
bronze pins.
3. Fitting for 22AWG/23AWG/24AWG cables, punching duration 250 times. FCC ports
inserting duration 750 times.
4. Cabling sequence T568A & B.
5. Punching tool Standard 110 tool for 110 IDC, Standard LSA tool for LSA IDC,
Standard 110 tools or LSA tool for dual IDC.
6. Testing condition of transmitting capability 100MHz
panel is same which makes sure that the performance of each port is consistent.
2. According to the standard of ISO/IEC 11801 2000 CLASS D and ANSI/TIA/EIA/568B
Cat.5e standard. T568A punching sequence and T568B punching sequence are both
compatible. Fitting for horizontal distribution in the equipments room and
equipments connecting.
3. Connecting FCC port for Cat.5e UTP patch cord and IDC for horizontal distribution
cables.
4. Compatibility Compatible for UTP Cat.5e general cable distribution systems.
5. IDC 110 type or dual use type for your choice.
Technique Characteristics
1. Entire high-carbon steel outer frame, with plastic powder cladding.
2. RJ45 jack frame material PBT, golden plated phosphor bronze pins, Shielding shell
of the RJ45 jack Brass housing with nicket-plated; IDC clip Tinned phosphor
bronze pins.
3. Fitting for 22AWG/23AWG/24AWG cables, punching duration 250 times. FCC ports
inserting duration 750 times.
4. Cabling sequence T568A & B.
5. Punching tool Standard 110 tool for 110 IDC, Standard LSA tool for LSA IDC,
Standard 110 tools or LSA tool for dual IDC.
6. Testing condition of transmitting capability 100MHz
نوع Termination
Punchdown
نوع رکمونت
1U
نوع محافظ کابل
بدون محافظ (Unshielded)
وزن
780 گرم
کلاس عملکرد
Cat5E
نظرات کاربران 2 ( از 24 نظر )
با ثبت نظرات خود دیگران را در خرید این کالا راهنمایی کنید
برای ثبت نظر، لازم است ابتدا وارد حساب کاربری خود شوید.
ثبت نظر جدیدهیچ موردی جهت نمایش وجود ندارد
- 1
- 2
- 3
پرسش خود را درباره پچ پنل 24 پورت سرلینک مدل T5E بیان کنید
پرسش و پاسخ
پرسش و پاسخ
هیچ موردی جهت نمایش وجود ندارد
- 1
- 2
- 3
مفیدترین نظرات
